Design & Function
GutterStuff®Pro, is the original Patented Foam Filter Insert, which prevents leaves and large debris from entering and clogging your gutters, while allowing all the rainwater to flow through the gutter system, rapidly.
This original, simple, and innovative concept which was first developed and brought to market by Gutter Stuff Inc. has been a huge success with homeowners throughout The USA, Canada, and now Europe and various other countries worldwide.
GutterStuff®Pro provides superior gutter protection against leaves, twigs, and other clogging agents. Its soft texture cannot be dented or damaged by falling branches. It remains snug and unseen in the gutter while keeping the homeowner safely on the ground.
GutterStuff®Pro also provides tremendous benefits to homeowners in winter as it does not freeze. With a 97% void capability and its heat absorbing ability, Snow and Ice cannot block it up. Whenever snow melts into the gutter, it will filter out and continue to flow through the system.
GutterStuff®Pro prevents your gutters from becoming the anchor for Ice damming, thus helping to eliminate costly roof damage. It can also reduce the occurrence of icicles hanging from the gutter.
Performance and Durability
GutterStuff®Pro is protected throughout by a flame retardant Latex coating which provides long life and complete outdoor protection and durability. The coating enhances the foams durability by “Rubberizing” it from top to bottom and protecting it from UV and environmental degradation without impeding the filtering and flow capability of the product. The product also contains a germicide package to inhibit biological growth within the foam.
GutterStuff®Pro is manufactured to the highest technical standards from the manufacturing Plant, through fabrication, to the thorough coating process.
GutterStuff®Pro demonstrates the highest degree of consistency and effectiveness in the industry and is backed by a 25 year performance warranty.
GutterStuff®Pro is available in all of the most common gutter profiles and can also be custom made for most any industrial, commercial, or unique project.
GutterStuff®Pro is easy to install - it is not screwed to the roof or the gutter lip. It either slides into the gutter under the spikes or hangers, or it can be trimmed to fit over the hangers. It can be installed into Half Round gutters with any common gutter sealer.
Because GutterStuff®Pro is attached only to the gutter, it can be used with equal ease on any roof type: shingle, tile, slate, and even on flat roofs. Anywhere a gutter is hung is a good place for GutterStuff®Pro.
